This and the next few posts will be focusing on hard drive selection for DVRs. This post will look at the type of workload that a DVR imposes on drives, using Project Entangle as an example. Subsequent posts will look at various system characteristics that can affect performance and performance measurements from some drives. And we’ll take a special look at shingled magnetic recording (SMR) drives, as they tend to have some very peculiar performance characteristics.
I’ve been in Las Vegas this week for the Amazon re:Invent conference. While there are enough sessions, receptions, and parties to keep you occupied day and night, I just couldn’t pass up a chance to check out the Las Vegas OTA airwaves. The Vdara staff was a bit mystified by my request for the highest south-facing room I could get, but very accommodating. So here I am on the 49th floor with good line-of-sight to the major towers (and a view of the desert instead of the Bellagio fountains, which apparently most people ask for.)
I had packed up a full Entangle development setup, including my trusty Silver Sensor antenna (aka the Zenith ZHDTV1). What I failed to do while busily packing was to check the RF frequencies of the Las Vegas broadcasts. As it turns out there are a few major channels in the VHF bands, including one on channel 2. Sadly the Silver Sensor is a UHF-only antenna.
This brings up an interesting point regarding the current state of OTA antennas: many of them, particularly the compact ones, are UHF-only. Even the ones that claim to be both UHF and VHF don’t handle VHF very well. At best they’ll pull in VHF-Hi. But can you make do with a UHF-only setup?